Portable ventilator A-IVL-E-03
Become a partner
Contact us
Cart Empty cart
Contact us

Portable ventilator A-IVL-E-03

Add to cart


Hover over the image to zoom

Portable ventilator A-IVL-E-03

Portable ventilator A-IVL-E-03 is a high-tech device for maintaining the respiratory functions in adult patients and children under the emergency medicine conditions, in ambulances, field hospitals, as well as during intrahospital transportation.
The device allows maintaining lung ventilation in response to respiratory efforts of the patient and provides forced supply of the mixture in their absence, as well as oxygen to the patient during resuscitation.

Benefits:

- a wide range of modes will help patients at different health conditions:

a) forced ventilation mode - for patients unable to breathe on their own;

b) forced-assisted ventilation mode - for patients with impaired respiratory functions;

c) assisted ventilation mode - for patients with respiratory function as a response to respiratory efforts

d) manual mode - emergency continuous supply of oxygen or air mixture stream;

e) resuscitation mode - oxygen supply during cardiopulmonary resuscitation.

- a wide range of adjustable parameters: selection of respiratory rate and minute volume, the inspiration and expiration ratio, the respiratory pressure range, oxygen content in the gas mixture;

- the ability to supply oxygen either from a cylinder, or from a hospital oxygen network (if an adapter is available)

- the possibility of ventilation through a facial mask or tracheal tube depending on the patient condition;

- a highly informative 2.7-inch color screen displaying the operating mode, minute volume, gas pressure, inspiration and expiration ratio, ventilation rate, battery discharge level, graph of pressure or volume change (optional);

- reusable patient breathing circuit suitable for 30 sterilization and reuse cycles;

- power supply from a 2.9 Ah battery, the vehicle’s onboard network, and AC mains;

- a main control unit housing made of ABS plastic and an aluminum platform ensure reliable operation of the device under the rescue and emergency conditions;

- operation safety for the patient due to sound and light alarms of high gas pressure in the respiratory circuit, low pressure at the device inlet, low charge level, and leakage in the patient's respiratory circuit;

- the ability to disable/enable voice warnings;

- ease of use of the device: electronic control along with mechanical knobs for adjusting minute volume and ventilation rate, which increases the response rate of medical personnel to changes in the patient's condition.



Scope of supply:

  • control unit,

  • reduction valve,

  • 2 liter oxygen cylinder,

  • reusable patient breathing circuit (hose + patient valve),

  • rechargeable battery (4 Li-Ion components) installed in the control unit,

  • a kit of facial masks for adult, teenage, children - 1 pc. of each,

  • carry bag,

  • case for mounting the control unit and oxygen cylinder,

  • oxygen hose,

  • power supply unit,

  • power supply cable for connection to the vehicle’s onboard network,

  • bracket for mounting in vehicle and to the wall.



Optionally:

  • adapter for connection to a hospital oxygen network.

Technical Parameters:

Modes / Parameters

range of ventilation rate, L/min.

range of minute volume, L

inspiration and expiration ratio

range of respiratory pressure in the patient connecting hole, cm w.g.

Triggering

IPPV

forced ventilation

10/15/20/30/40/ 50/60/70/80 ±5%

0.5/3/6/9/11/13/15/20/25/30 ±20%

1:4/ 1:3/ 1:2/ 1:1/ 2:1/ 3:1 / 4:1 ±10%


15/20/25/30/35/40/45/ 50/55/60 ±10%


SIMV

forced-assisted ventilation

10/15/20/25/30 ±5%

0.5/3/6/9/11/13/15/20/25/30 ±20%

15/20/25/30/35/40/45/ 50/55/60 ±10%

inspiration triggering - at a pressure minus (2±1) cm w.g. during a window for awaiting for patient’s inspiration effort at ventilation rate from 10 to 30 L/min.

Expiration triggering in assisted inspiration:

– decreased gas mixture stream velocity down to the value below 0.5 L/min at minute volume from 0.5 to 3 L/min;

– decreased gas mixture stream velocity down to the value below 8 L/min at minute volume from 6 to 30 L/min

PSV

assisted ventilation

10/15/20/30/40/ 50/60/70/80

±10%

10/15/20/30/40/50/60/ 70/80

±10%



inspiration triggering - at a pressure minus (2±1) cm w.g. during a window for awaiting for patient’s inspiration effort;

– upon expiration of (9±1) seconds from the last inspiration triggering;

– upon expiration of (9±1) seconds from the mode activation;

Expiration triggering in following cases:

– decreased gas mixture stream velocity down to the value below 0.5 L/min when pressure in the patient connecting breathing hole decreases from 5 to 10 cm w.g.;

– decreased gas mixture stream velocity down to the value below 8 L/min when pressure in the patient connecting breathing hole decreases from 15 to 60 cm w.g.

P manual mode


15/20/25/30/35/40/45/ 50/55/60

±10%




REAN

resuscitation

2 consecutive breaths no less than 1

sec.

0.5/3/6/9/11/13/15/20/25/30 ±20%


Not more than 45


О2 concentration

60% or 100%

Storage Energy Time Requirement

3 hours

Operating mode setting time

30 sec.

Sound warning volume

Not less than 60 dB, warnings can be disabled.

Power supply

AC mains (220 +33-55) V with frequency (50±2.5) Hz

DC source with voltage from 10.2 to 15 V, 3 Ah

from a battery of four lithium-ion cells 18650/4S1P/2.9Ah/14.8 V.

Overall dimensions of the ventilator in a case

Overall dimensions of the ventilator in a bag with all accessories, not more than:

470х305х140 mm.


Weight of the set

Not more than 12 kg

Ingress protection rating

IPX4






Features and grade medical equipment are subject to change without notice. In avoid misunderstandings when buying, check the information with manager by phone (3412) 78-45-47 or (3412) 78-45-47.

Delivery

Concern "Axion" Ltd. provides complex deliveries of production in all regions of Russia. The cost and delivery time should be discussed with the manager by phone or e-mail. Delivery to the transport company in Izhevsk is free of charge. The buyer pays only the cost of the transport company services. The cost of delivery can be included in the invoice, as transportation services or delivery can be paid by the Buyer upon receipt of the goods directly to the transport company. We can send the goods by any other transport company as agreed by the buyer. The original invoice, packing list and tax invoice are sent together with the goods. .